Back to the last certificates list

 Date created 2018-11-13
 Holder JACKON INSULATION GmbH
Ritzlebener Strasse 1
D-39619 ARENDSEE
Germany
 Certificate no. 09/074/581/11
 Family Extruded polystyrene (XPS)
 Commercial brand(s) (products)
Products Purposes
JACKODUR KF 700 standard - Insulation under paving on median - Single-family home
- Insulation under paving on land - Other than single-family dwelling
- Thermal insulation from the exterior of the buried walls with waterproofing
- Insulation between wood floor joists
- Insulation with ventilated cladding
- Cloth insulation
- Cloth insulation
- Double masonry wall
- Wood frame walls
- Distributing or separating partitions between rooms
- Insulation installed by creeping roof or roofing from inside - between and under chevron
- Insulation on suspended ceilings
- Insulation for roof terrace
DOMODUR KF 700 standard - Insulation under paving on median - Single-family home
- Insulation under paving on land - Other than single-family dwelling
- Thermal insulation from the exterior of the buried walls with waterproofing
- Insulation between wood floor joists
- Insulation with ventilated cladding
- Cloth insulation
- Cloth insulation
- Double masonry wall
- Wood frame walls
- Distributing or separating partitions between rooms
- Insulation installed by creeping roof or roofing from inside - between and under chevron
- Insulation on suspended ceilings
- Insulation for roof terrace
 Plant(s) Arendsee - Allemagne
 Certified thermal conductivity
Thicknesses
mm
Thermal conductivity
λD W/(m.K)
from 40 to 60  mm 0.034 W/(m.K)
from 70 to 180  mm 0.035 W/(m.K)
Puce Certified thermal resistance
Thicknesses
mm
Thermal resistances
m².K/W
40 mm 1.15
50 mm 1.45
60 mm 1.75
70 mm 2.00
80 mm 2.25
90 mm 2.55
100 mm 2.85
110 mm 3.10
120 mm 3.40
130 mm 3.70
140 mm 4.00
150 mm 4.25
160 mm 4.55
170 mm 4.85
180 mm 5.10
Puce Critical compressive strength
Thickness
mm
Rcs
(≥ kPa)
ds mini
(%)
ds maxi
(%)
Modulus of elasticity in use
(≥ MPa)
from 50 to 180  mm 330.000 0.90 1.60
 Euroclass(es) Euroclasse E

 Other certified characteristics

 Thickness tolerance T1
 Dimensional stability under defined temperature and humidity conditions DS(70,90)
 Compressive stress CS(10\Y)700
 Compressive creep CC(2/1.5/50)250
 Deformation under defined compressive load and temperature conditions DLT(2)5
 Freeze/thaw resistance FTCD1
 Long-term water absorption by diffusion (50 à 60 mm) WD(V)3
 Water absorption by diffusion (70 à 180 mm) WD(V)2
 Traction perpendicular to the surfaces (100 à 180 mm) TR200
 Water vapor permeability MU50
 Long-term water absorption by total immersion WL(T)0,7